User Manual

厦门视诚科技有限公司 地址：厦门市火炬高新区创业园伟业楼 S601
网址：www.rgblink.com 电话：[phone] 传真：[phone]
23
Target lost time(s): It means how much time is required (0s by default) for tracking camera to perform “target lost
action” when target is lost (default: return to panoramic preset).
Inter PGM: It is chosen default.
Student IP address: Fill in the IP of the student tracking camera here. When the director stream is obtained, the
close-up of the teacher tracking camera and the panoramic switch of the student tracking camera can be realized.
3.7 Description of Recording and Broadcasting
Host
3.7.1 Auto Tracking Control
The recording and broadcasting host sends command by LAN network port and controls automatic tracking
motion of teacher tracking camera. In auto tracking mode, it does not allow control the pan rotation or zoom by
the control interface from the browser or remote control; in stop auto tracking mode, it is allowed.
1. Network receiving address
Teacher auto tracking camera default IP is: 192.168.5.163.
2. Command
Action
Command
Start teacher tracking
0x810x0A 0x08 0x01 0x020xFF
Stop teacher tracking
0x81 0x0A 0x08 0x01 0x03 0xFF
3.7.2 Action Code Docking
Tracking status of teacher tracking camera will be feedback to recording and broadcasting host in real time via
network (UDP transmission mode) in the action code form.
1. Configuration of recording and broadcasting host address
If recording and broadcasting host uses LAN to receive action code, then it needs to configure host address by web
browser. Click Advanced settings -> Server, as shown below: