User Manual

厦门视诚科技有限公司 地址：厦门市火炬高新区创业园伟业楼 S601
网址：www.rgblink.com 电话：[phone] 传真：[phone]
14
optional; panoramic sub-stream default 512Kb/s, 64-40960Kb/s optional; and broadcast code stream default
4096Kb/s, 64-40960Kb/s optional).
Frame rate (F/S): Set the video frame rate (close-up main stream, close-up sub-stream, panoramic main stream,
panoramic sub-stream, and broadcast code stream default 25F/S, main stream 5-30F/S optional).
Key frame interval: Set the key frame interval (close-up main stream, close-up sub-stream, panoramic main
stream, panoramic sub-stream, and broadcast code stream default 100F, main stream 1-150F optional).
Key frame minimum QP: Set the key frame minimum QP (default 20, 10-51 optional)
Stream Name: When streaming via rtsp or rtmp, user can modify stream name. close-up main stream(default
live/av0), close-up sub-stream(default live/av1), panoramic main stream(default live/av2), panoramic
sub-stream(default live/av3), and broadcast code stream(default live/av4).
Click the "Save" button to display the "saved successfully" message, then settings take effect.
2) Stream Release
Switch: To turn on/off close-up main stream, close-up sub-stream, panoramic main stream, panoramic sub-stream
and blackboard code stream.
Protocol: primary / secondary stream applies RTMP protocol.
Host Port: server port number (default 1935, 0-65535 optional)
Host Address: server IP addresses (default 192.168.5.11)
Stream Name: choose a different stream name (live / av0, live / av1, live/av2,live/av3,live/av4 optional).
User: Set the user name.
Password: Set the password.
Click on the "Save" button to display the "Save successful" message, then settings take effect.
3) RTP Broadcasting
Switch: To turn on/off close-up main stream, close-up sub-stream, panoramic main stream, panoramic sub-stream
and blackboard code stream.
Protocol: RTP or TS
Address: Default 224.1.2.3. It can be edited.
Port: Main Stream Default Port: close-up main stream default 4000
，
close-up sub-stream default 4002
，
panoramic
main stream default 4004
，
panoramic sub-stream default 4006
，
broadcast code stream default 4008.
Visit: Address comes up after setting. Eg ; rtp: //224.1.2.3:4000; udp: //@224.1.2.3:4000
4)Video Parameters
a. Exposure: Exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit, wide
dynamic, shutter speed, aperture value and brightness can be set.
Exposure Mode: Set the exposure mode (the default automatic, manual, shutter priority, aperture priority,
Brightness priority optional)
Exposure compensation: Exposure compensation setting is active when it is auto status (default is off).
Exposure compensation value: Set the exposure compensation value, valid when it is set for auto (default 0, -7
to 7 optional).
BLC: Set back light compensation, valid when it is auto status (default is off).
Anti-flicker: Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default
50Hz, closed, 60Hz optional).
Gain limit: set the gain limits, only valid when exposure mode is automatic, aperture/brightness
priority.(default 4, 0-15 optional).
Dynamic range: Set the dynamic range (default 4, 1-8 optional).
Shutter speed: Active when it is status of manual or shutter-priority (default 1/100，
1/25,1/30,1/50,1/60,1/90,1/100,1/120,1/180,1/250,1/350,1/500,1/1000,1/2000,1/3000,1/4000,1/6000,1/100
00 optional).
Aperture value: Set the aperture value, active when it is status of manual or aperture-priority (default close,
F1.8, F11, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0 optional).
Brightness: Set the brightness value, active when it is a state of brightness priority (default 7, 0-23 optional).
b. Color: White balance, saturation, color, white balance, sensitivity, color temperature, gain red and blue gain
can be set.