User Manual

厦门视诚科技有限公司 地址：厦门市火炬高新区创业园伟业楼 S601
网址：www.rgblink.com 电话：[phone] 传真：[phone]
13
3.4 Browser Configuration
Click Configuration to enter into the device parameters setting page
There are the following options: audio configuration, video configuration, network configuration and system
configuration, detailed description see the following table.
Menu
Explanation
Audio
configure
Including audio compressing format, sampling frequency, sampling precision,
compressing code rate settings etc.
Video
configure
Including video encoding, stream release, RTP broadcasting ,video parameters,
character-overlapping, character size, video output setting etc.
Network
configure
Including basic parameters, Ethernet, DNS, GB28181, wireless network setting etc.
System
configure
Including equipment property, system time, user management, version update,
reset, reboot device settings etc.
3.4.1 Audio Configuration
Switch: Choose to enable the audio or not. (default: off)
Compressing Format: Set audio compressing format and the device will reboot automatically after change (default
MP3, AAC, G.711A optional)
Sampling Frequency: Set sampling frequency and the device will reboot automatically after change (default 44100,
8000, 16000, 32000 and 48000 optional)
Sampling Precision: Set sampling precision (default 16bits)
Compressing Code Rate: Set audio compressing code rate (default 64bits, 32, 48, 96, 128bits optional)
Channel type: Set channel type (default mono, stereo optional)
Input Volume: Set the input volume (default 2, 1-10 optional)
Click “Save”, it will remind ”Enable has changed. Restart the device to take effect after the success of the save.”,
then please reboot the camera to make new setting effect.
3.4.2 Video Configuration
1) Video Encoding
Code stream: Different video output mode setting, use different streams. (close-up main stream, close-up
sub-stream, panoramic main stream, panoramic sub-stream, and broadcast code stream)
Compression Format: Set the video compression format, save and reboot to take it effect (main / secondary
stream default: H.264, H.265 optional)
Profile: Set Profile mode (default HP, BP, MP optional）
Video Size: Set video image resolution, save and reboot to take it effect (close-up main stream default 1920*1080,
1280*720, 640*480 optional; close-up sub-stream default 320*180
，
320*240,640*360, 640*480, 1280*720
optional; panoramic main stream default 1920*1080，1280*720,640*480 optional; panoramic sub-stream default
320*180，320*240,640*360,640*480,1280*720 optional; broadcast code stream 1920*1080，1280*720,640*480
optional)
Stream Rate control: Set rate control mode, save and reboot to take it effect (close-up main stream, close-up
sub-stream, panoramic main stream, panoramic sub-stream and blackboard code stream default variable bit rate,
fixed rate is for option).
Image Quality: Set the image quality, image quality can be changed only when rate control is variable bit
rate,(main stream defaulted is best, secondary stream default is better, there are best, better, good, bad, worse,
worst for options).
Rate (Kb/s): Set the video bit rate (close-up main stream default 4096Kb/s, 64-40960Kb/s optional; close-up
sub-stream default 512Kb/s, 64-40960Kb/s optional; panoramic main stream default 4096Kb/s, 64-40960Kb/s