User Manual

Chapter 6: Appendi×
X
2 User Manual
62
6.2 Software Upgrade
Upgrade the software by the USB interface in the front panel of X2, the upgrade steps are as
follows:
1. Copy the “*.pkg” file to the USB disk, and modify the file name to “_update.pkg”.
2. Plug into the power cord and make sure the X2is in normal operation.
3. Plug the USB disk into the USB interface in the front panel of X2, the device
will upgrade automatically. The buzzer sounds beeps during upgrade, the beeps will
stop and the USB disk will delete the upgrade file automatically after complete upgrade.