User Manual

X
2 User Manual
47
4.2.6 System Settings
Click the “System Settings”, and enter the interface as follows:
Connect Setting, IP settings, System information,Streaming IP Power on Settin Fan Control,
Factory Reset and Streaming Setting are included in system settings, specific as follows:
Connect Setting
Click the “Connet Setting”, and pop-up window as follows:
Select the serial connect and Ethernet connect, the software will search all the devices if
not select “Search by this configuration”.
If select “Serial Connect” and “Search by this configuration”, the software will search all
the devices with corresponding serial port.
If select “Ethernet Connect” and “Search by this configuration”, the software will search all
the devices with corresponding IP.