User Manual

X
2 User Manual
35
Adjust Layer: Two ways can change the size and location of the opened layer:
a. Drag the opened layer by mouse. The details are: move the mouse to the brink of the opened
layer, when the mouse shows”<—>”, press the left key of the mouse and drag the window to a
suitable size and then release the mouse. Or move the mouse to the lower right of the opened
layer, press the left key of the mouse and drag the window to a suitable size and then release the
mouse. Move the mouse to the opened layer and press the left key of the mouse and move the
mouse, then the layer will be moved, release the mouse when moved to the suitable location.
But this method can only adjust the size and location roughly, if an accurate adjustment is needed,
the second method can be used.
b. Select the layer to be adjusted, and set the X, Y, width and height in the bottom of the
interface.
Hierarchical relations between layers: After creating the layers, the hierarchical relations can be
changed by the following: click the shortcut key bring layer to top “ ”, bring layer to bottom
“ ”, layer forward “ ” or layer backward “ ”. The layer can be set as background
by click “ ” and click “ ” to remove the layer background.
Close one layer or all layers: Click the icon on the top right corner of the layer to close one
layer, or click the shortcut key “ ” to close all layers.
Lock the layer: Click the icon on the top right corner of the layer to lock the layer, the layer
can’t be moved or adjusted if be locked.
Full the layer: Click the icon on the top right corner of the layer to full cell, and click the
icon to full screen.
Copy and paste bank: Select the bank that to copy, and click the copy bank shortcut “ ” on
the right side of the interface, then select the bank that to paste, and click the paste bank
shortcut “ ”. The selected layer will pasted to the bank.
Adaptive: If scale the output area to a large area, click the adaptive shortcut “ ” on the right
side of the interface, the output area will be return to the best position.
Layer Property Setting: Select the layer to be adjusted, click the More shortcut “ ” in
the bottom of the interface, and enter the interface as follows: