User Manual

X
2 User Manual
34
Rotation: Select the monitor, and set the rotation as 0°, 90°, 180° and 270° in the bottom of the
interface. Click “OK” to confirm. As shown in the figure below:
Right click the monitor can also rotate the monitor.
Output Area Size Setting: Move the mouse to the output area and slide the mouse wheel, the
output area size can be zoom in and out.
Layer Setting
New Layer: In output screen zone of controlling software, press the left mouse key and drag on
the intended output screen to cover the whole current screen. And the below interface will be
displayed. A layer can also be opened by double clicking the left signal source to be shown on the
window.