User Manual

X
2 User Manual
33
Close monitor: Click the icon on the top right corner of the monitor to close one monitor,
or click the shortcut on the right side of the interface to close all monitors.
Reset monitor: User can reset the monitor by clicking the shortcut on the right side of
the interface.
Swap monitor: User can swap the monitor by clicking the shortcut on the right side of
the interface, as shown in the figure below.
Auto tile: User can enable or disable the auto tile function by clicking the auto tile shortcut
on the right side of the interface. If select auto tile “ON’, the layer will automatically snap
to the output grid when move the layer to the position within the threshold value.
Monitor Size and Position Setting: Move the mouse to the lower right brink of the monitor, and
press the left key of the mouse. Move the mouse to the suitable position and release the mouse.
But this method can only adjust the size and location roughly, if an accurate adjustment is needed,
select the monitor, and set the X, Y, width and height in the bottom of the interface.
Monitor Size changed equivalently: Select any monitor, for example, select monitor 1, and adjust
the size. Click this monitor, then press button C and don’t let go, select the monitor that will set,
the size of the selected monitor will be changed to the same size of monitor 1, as shown in the
figure below: