User Manual

X
2 User Manual
31
Crop: Crop the left, top, width and height.
Display Mode: Select “Live” or “Freeze”.
Mirror: Enable or disable the mirror function, default “OFF”.
Bypass Mode: Enable or disable the bypass mode. When select “ON”, the output format will be
the same with the input format.
Alpha: Set the alpha, the adjustment range is 0~128.
Sharpness: Set the sharpness, the adjustment range is 0~100.
Brightness: Set the brightness, the adjustment range is 0~100.
Contrast: Set the contrast, the adjustment range is 0~100.
Saturation: Set the saturation, the adjustment range is 0~100.
Color Term: Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset: Select “Reset”, the input property will be recover to factory setting.
Output Setting
Click “Monitor” shortcut , it will enter the interface as follows:
Split Mode: Default quick split “OFF”. User can enable the quick split function by sliding the
switch to “ON”. LED type and LCD type can also be selected by sliding the monitor type switch,
specific as follows:
LED Type: Default LED type. In LED type, user can custom the H total, V total, row and column, as
shown in the figure below: