User Manual

X
2 User Manual
30
Display LOGO: Select the number of “Display LOGO”.
Live/Freeze: Select “Live/Freeze”, the image is frozen. Cancel it, the image is live.
USB Player: Right click the USB input, and select “USB Player”, it will enter to the USB Player
interface, including movie and picture, default play the USB movie.
USB movie player setting: Can select play in order, random, single cycle and all cycle, switch to
pre or next, pause or play, and read the movie name, progress bar and time.
USB picture play time: Click the picture, it will display the setting interface, default the time is 0s.
Set the switch time, and click “Set”.
USB picture player setting: Can select play in order, random, single cycle and all cycle, and switch
to pre or next, pause or play.
USB Upgrade: Put the file in the form of MERGE.bin to the USB disk root directory, and connect
to the USB input. Right click the USB input, and select “USB Upgrade” to begin to upgrade USB.
(Note: upgrade is only for the USB port that connected, user need to upgrade the four USB ports
respectively.
Set Input Property: Right click the input and select “Set Input Property”, it will enter to the
interface as follows:
Scale: Set the X, Y, width and height.