User Manual

X
2 User Manual
29
Signal List
The signal list is shown as follows:
It displays the input module type, the quantity of inputs and input format. Right click the input
for the following settings:
Change Name: Select “New Name”, and input the new name, click “OK” after setting.
Refresh Signals: Right click the input and select “Refresh Signals”. If there is signal, it will show
the input format, or it will show “No Input”.
LOGO: Right click HDMI/DVI input, and select “LOGO”, it will enter to the LOGO menu items.
LOGO capture: Select the LOGO, there are 10 groups of LOGO. The image is frozen when capture
LOGO.
Hide LOGO: Select “Hide LOGO”, the LOGO will be hidden.