User Manual

X
2 User Manual
25
4.2.3 Output Settings
Click the “Output Settings”, and enter to the interface as follows:
Output Setting, DE Setting, Test pattern and OSD are included in output settings, specific as
follows:
Output Setting
Click the “Output Setting”, and pop-up window as follows:
Output: Click the drop down arrow after the format, and select the output resolution in the
pull-down menus according to actual need.
Format: The width, height and frequency can be set if select “Custom” in “Format”. Click
“Setting” to confirm.
Genlock: Enable or disable the Genlock function by sliding the Genlock switch. If select “ON”, the
output resolution will be same with the resolution that selected. HDMI or BNC can be selected in