User Manual

X
2 User Manual
17
3.3.4 System
SYSTEM INFO
SN
Display the serial number of the device.
DEVICE INFO
Display the version of input card, output card, COM. CARD and KEYPAD.
TECH SUPPORT
Display the factory sales, customer service, email and other contact
information, etc.
DATE&TIME
User can view and change the date, time and week, view the current time,
total time and boot times.
ETHERNET
DHCP, IP, mask, gateway, MAC and WIFI setting.
User can enable or disable the DHCP function.
Default IP address is 192.168.000.100, mask is 255.255.255.000, gateway is
192.168.000.001.
Enable or disable the WIFI function. When select “ON”, STA or AP mode
can be selected.
FAN CONTROL
AUTO SPEED
Enable or disable the auto speed function
CURRENT SPEED
Set the current speed.
TIMER
User can set the timer power on and timer power off from Sunday to
Saturday. When set timer as “ON”, the timer tasks will take effect.
BEEF
Enable or disable the beep function.
TEMPERATUR
E
ALARM
Set the alarm temperature. The device will alarm when reach the alarm
temperature.
UNIT
->SYSTEM INFO >>
DATE&TIME >>
ETHERNET >>
FAN CONTROL >>
->TIMER >>
BEEF ON
TEMPERATURE >>
LIGHT STYLE MODE 7