User Manual

mini-pro User Manual
40
5.3 Upgrade
1.Tools：
 Firmware ZIP upgrade package
 XTOOL (V1.0.1.10 or higher) -packaged in the ZIP
 Computer with network connection
o Windows (minimum Win 7, Win 10 recommended)
o macOS (minimum 10.13 High Sierra)
2.Upgrade
2.1 Power on the device and connect LAN ports between PC and device by Cat6 cable;
2.2xEnsure that your computer is on the same network as the mini-pro. The default IP address of
mini-pro is 192.168.0.99, in which case your computers IP address should be in the range 192.168.0.xxx (xxx cann
ot be the same as mini-pro or other device on the network) to enable connection between the mini-pro and your
computer.
Check IP of PC:
1. Press keys together
to open the Command Prompt; In the
dialog type: ms-settings:network-status
2. Click on the “Properties” button
1
Note: The format of the LOGO image should be BMP 24 bits, and the image size should be within 256*128
pixels.
2
3