User Manual

mini-pro User Manual
38
PTZ Camera Setting
When controlling the PTZ camera, the computer, mini -pro and PTZ camera should be in the same
network segment.
2
2
3
1. Select the base color you want to remove, there
are 6 kinds of colors you can select: orange, yellow,
green, cyan,blue and purple.
1
1
1. Set the corresponding communication port on
the PTZ camera, such as VISCA or UDP port 1259.
2. Set both old IP and new IP to the camera IP address
you want to control,the corresponding communication
port to 1259 on mini-pro, configuration path: M(Menu)→
FX→ PTZ Camera Setting Port on the control software of
mini-pro.
2. You can click in the MAX MIN MARGIN data
input box to achieve a more precise keying effect.
Note: When using chroma key, make sure that the layer you want to edit is on the top layer, which is the B layer
in the PIP setting, otherwise you may not see the chromakey effect.
1
2