User Manual

mini-pro User Manual
37
Password Protection
In order to solve the problem of control conflicts caused by different devices controlling the same
mini-pro in the same LAN, XPOSE mini provides a password protection function, as an administrator,
you can set a password for the device controlling XPOSE mini, and when you control the interface
again, you need to enter the password to control it.
T-Bar Calibration
If the T-Bar is not in the correct position, no other operation is possible. t-Bar correction is available
in XPOSE mini.
The steps are as follow：
1. Turn on the T-Bar Calibration switch.
2. Push the T-Bar to the far right on the mini-pro.
3. Turn on the "On" switch
4. Push the T-Bar to the far left on the mini-pro.
5. Turn on the "On" switch
Chroma Key
mini-pro also provides chroma key of sub-screens. Sub-screen keying is possible with PIP turned
on,which helps you to combine characters with the virtual background.
Make sure to use XPOSE mini V1.0.0.9 or higher before using the latest program, and make sure to
use mini-pro V1.23 and higher.
Note: If you have forgotten your password, please restore the factory settings on the mini-pro.