User Manual
Table Of Contents
- Declarations
- Chapter 1 Your Product
- Chapter 2 Install Your Prod
- Chapter 3 Use Your Product
- Chapter 4 Streaming
- Chapter 5 XPOSE mini Operation
- Chapter 6 Ordering Codes
- Chapter 7 Support
- Chapter 8 Appendix
mini-pro User Manual
32
(2) Change the PC’s IP Address
To ensure that the mini-pro and the PC can communicate smoothly, the IP address of the computer
needs to be verified.
Steps to modify the IP address of the Ethernet port (windows).
1
1. Open the Network Sharing Center;
Click on "Ethernet";
2.
2. Access to Properties may require administrator
privileges;
Under "This connection uses the following
items", find "Internet Protocol version 4
(TCP/IPv4)";
3. Select "Use the following IP address" and
change the IP address to the same network
segment as mini-pro
eg: mini-pro's IP address is 192.168.0.99, then the
computer's IP address can be set to
192.168.0.1-255. Please make sure that the IP
addresses do not conflict.
1
2
3