User Manual

mini-pro User Manual
26
main/sub-screen, push the signal source to switch between different signals, adjust the size of the
screen through the Up/Down buttons, adjust the position of the screen through the joystick, and all
the re-adjusted settings will be Saved to the current View in real time.
3.8 Logo
mini-pro supports saving a picture as LOGO to the device, and the picture format can be JPG,
PNG, BPM, GIF.
3.9 PTZ
mini-pro can control cameras supporting VISCA protocol. Mini-pro can control the camera’s
lens moving horizontally and vertically, focus and zoom. Not only that, the mini-pro can also save
the position and zoom information of the camera, so that you can quickly retrieve it the next time
you use it.
The PTZ preset of mini-pro not only saves the parameters of the PTZ, but also includes calling
the camera, that is, when the View of the PTZ is loaded, the input is switched to the camera signal
source at the same time.
Tap the button【M】to return to the main menu, find the【PTZ】icon and tap the icon to enter
the menu.
The PTZ menu is shown below
When setting PTZ, use the signal key ①②③④ to select the corresponding PTZ camera
signal to preview.
On the PTZ menu interface , when the PTZ function is enabled, the rotation angle of the PTZ
can be adjusted by the joystick, and the focal length adjusted by the Up/Down keys. Pushing signal
keys can switch the signal source between different PTZ cameras.