User Manual

mini-pro User Manual
12
Chapter 2 Install Your Product
2.1 Plug in Power
RGBlink mini-pro is packaged with a 12V power link cable and Type C power Adapter.
When linking the power supply, please check the power supply standard used in your
country/region. If you are using a power supply that does not have a lock, please tighten the power
connector of the device to ensure the stability of the mini-pro's power supply.
2.2 Turn on Your mini-pro
After mini-pro is connected to power supply, push the Power button on the rear panel,the
device will enter to the boot interface and enter operation interface within 10S.
2.3 Input HDMI Signal Source
You can use any camera, computer or other HDMI device as the input source of the mini-pro. It
supports up to 4 sources of different formats and resolutions at the same time via 4 HDMI ports,
and HDMI 1 supports up to 4K@60Hz. If you are using interlaced signal, mini-pro supports
Connect mini-pro to power plug by the link cable
Note:
The Power Supply included with mini-pro is the recommended power supply for use with the device.In the
event the power supply is mislaid or otherwise not available, a USB-C power supply may be used provided
that the power supply :
1. meet s the USB Power Delivery (PD3.0) specification
2.has a "Fast Charge" capability
3.is rated for a minimum of 24W
and if a replacement USB-C cable is also needed,
4.a only a certified PD aware USB cable should be used