User Manual

26
/25
3. Set camera parameters such as zoom, focus, position adjustment, preset save, screen brightness adjustment
and speed adjustment
Zoom: Click [+] on the touch panel to zoom in the partial picture of the camera, and click [-] to zoom out
Focus: The system defaults to auto focus. If manual focus is needed, the auto focus function can be turned off
Brightness: Adjust the brightness of the camera
PTZ Speed: Controls the direction key induction speed of the position controller. The range is 1-13
Position controller: Click up, down, left and right to adjust the camera view Angle.
4. To SAVE camera setting,click the M1 panel, select < page 1>,< page 2>,< page 3> or < page 4> by turning the
knob. Each page has 5 banks, each BANK corresponding to the 1-5 number keys on the presets.
Factory Reset
1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select , enter to the
factory reset interface.
2. Select “Factory Reset” or “Factory Reset, Save IP” as needed, then will clean up the before setting, return to
default setting.