M1 Quick Start ● Modular design throughout ● Support hot swap modules ● Preview 4 inputs ● Seamless switching between PST and PGM ● Multiple audio outputs available ● 2 video layers plus additional layers for OSD,LOGO,STILL ● Mask feature for forground layer including support for user defined mask ● Compatible with all display types ● Genlock Y In ● Save Presets and settings on board and to USB ● 14 Streaming PGM output via optional USB 3.
CONTENTS Product Introduction................................................................................................................................................... 3 Packing Configuration................................................................................................................................................. 4 Hardware Orientation................................................................................................................................................
Product Introduction M1 is All-in-one scaling and vision mixing Tools. M1 can be up-down and cross-convert any input signal to the output, support 2 layers seamless switching from preview to PGM. Supports Integrated audio also. Operator can run M1 by its touch panel and its operations control panels, preview all the inputs and Preset by its PVW HDMI output ports, and seamless switching on its PGM program output port, with seamless transition efforts including Fade or Wipe.
Packing Configuration AC Power Cable USB Cable Cable DVI a HDMI Screw Driver HDMI to DVI Cable Network Cable USB3.0 线 Note: AC Power Cable supplied as standard according to destination market. USB is contained on the Warranty/Registration Card. Please keep.
Hardware Orientation Front Panel 1 5 6 5/25
Audio adjust area 2 3 7 4 8 Panel Instruction 1 Audio adjust area 5 Menu and LCD display area 2 Audio input area 6 Switching mode area 3 PGM output area and Logo button 7 Function area 4 PST output area and Logo button 8 Layer selection area 6/25
1 SOURCE FADER Source fader adjust 4 input signals' voice separatly to same value, each signal request to save. Remark: adjustment may not work if push it quickly MASTER FADER MASTER FADER is an amplification-factor of all channel invoice, come true Source value multiply by current Master value Remark: adjustment may not work if push it quickly CUE CUE is to switch PST audio preview or PGM audio preview.
4 LED INDICATOR The button 1/2/3/4/LOGO is lit when the signal or background input is selected for use. PST AREA For indicating, user can not change the channel or set the size or position in this area. LOGO For switching from PGM to test pattern. 6/7/8/9/0 Each button is numbered and can be used as direct number entry when values such as resolution and size. PST AREA For indicating, the button is lit when output the signal in PST channel. For selecting, push any button to switch the PST signal.
7 MASK Choose the button to full screen the selected layer SCALE Press this button to set PIP in PST window. Remar: Press the button to open PIP, select A/B layer to close PIP. Layer Selection Area 8 A/B For adding or deleting the layer, the button light is lit when add the layer, off when delete the layer, and flash when select the layer.
Rear Panel Input Interface 1 Optional Input Module 4 input card slots, supports input signals including DVI, HDMI, USB, SDI. Each DVI module supports 1 DVI-I input and compatible CVBS, VGA,YPbPr. Each HDMI module supports 1 HDMI-A input Each USB module supports 1 USB-B input and 1 USB backup. Each SDI module supports 1 SDI input and 1 SDI loop out. Output Interface 2 HDMI PVW Output 3 HDMI PGM Output 4 SDI PGM Output (Optional, not standard) 5 USB3.
Power Switch 12 AC 85-264V Max 65W, IEC-3 11/25
Using Your Product Menu Structure The menu structure is shown on the LCD Screen and in the figure below: LCD Touch Screen Menu Instruction 1 Return Button 12 DSK 2 Homepage 13 BLEND 3 Information Page 14 FREEZE 4 Input Resolution Display 15 BLACK 5 Output Resolution Display 16 Audio In 6 Input Menu 17 Audio Out 7 Output Menu 18 Lock Rear Panel 8 LOGO 19 Language/语言 9 MASK 20 System 10 Scale 21 Factory Reset 11 Transition Effect 12/25
Customized version for broadcasting 13/25
PST Mode M1 supports 1 HDMI preview output, and it supports the functions as below: Signal Selection Push any button in PGM or PST output area, for example, push the button [5], the border of signal 5 will change to yellow, and the signal in PGM monitor will be changed to signal 5. Add or Delete Layer Push any button of [A] to [B] in Layer Selection Area to add or delete the layer. Add layer: The light is lit. Select layer: The light is flashing. Delete layer: The light is off.
Scale and Crop the Layer 1. Push any button of [A] to [B] in Layer Selection Area, the light is flashing when the layer is selected. 2. Touch on LCD screen, and enter to the menus as follows: Use the rotary knob to adjust the size of the layer. If select , it will enter to the menus as follows: -> Crop H Pos Crop V Pos Crop H Pos: Crop the horizontal position. Crop H Size Crop V Pos: Crop the vertical position. Crop V Size Crop H Size: Crop the horizontal size.
Transitions Setting 1. Touch the transition buttons in LCD screen, M1 supports 15kinds of wipe modes: Touch the transition button , user can select ←[]→. Touch the transition button , can select L→R. Touch the transition button , user can select T→B. Touch the transition button , can select fade. Touch the transition button , user can select LT→RB. Touch the transition button , user can select ←＋→. Touch the transition button , user can select L←R.
2. Select the Audio input 1-4 for setting : Audio Source Sel Audio Gain Audio Delay Embedded 0 0 ms Audio Source Sel: Embedded or External Audio Gain: The adjustment range is between 0~100 Audio Delay: The adjustment range is between 0~20ms Audio Out Setting 1. Push [MENU] button, and enter to the menu items. Turn the rotary knob, select
Mask Setting 1. Push [MENU] button, and enter to the menu items. Turn the rotary knob, select option on LCD screen, rotary the knob or touch the directly to confirm. Mask Mask Mask Layer Mask & PIC POS 2. Select the Mask for setting : Mask Heart Oval Round Crescent Left Star Diamond Custom 1 0 0 0 0 0 0 0 Customs: Coming soon Custom LOGO 1. Push [MENU] button, and enter to the menu items.
PGM Mode 1. Switch the edited PST image to program by pushing the [CUT], [TAKE] button or T-bar, and then the PGM image will return to PST state, which can be edited. 2. There are 1 HDMI output and 1SDI output for program, and maximum realize 1920x1080 output.
Switching Mode 1. T-BAR switch: Switch the PST image to program with wipe and fade by T-bar. 2. CUT switch: Seamless switch the PST image to program by pushing [CUT] button. 3. TAKE switch: Switch the PST image to program with wipe and fade by pushing [TAKE] button. 4. CUE: Switch PST audio preview or PGM audio preview by pushing [CUE] button. 5. MUTE: Switch single audio output/Mix audio output.
Set the Output Parameter 1. Select the Output Resolution Push the [MENU] button, and enter to the menu items, turn the rotary knob and select
3. External Sync External Input Format External Sync Off No Input 1920x1080 @60 External Including option Off and On, Input will shown as actual input resolution. Format support choose 2 default resolution: 1280x720 @60 & 1920x1080 @60. 4.
Using Black Out Black out description: Black signal realizes one-key-touch to a black screen. M1 provides black effect processing for program output and preview output, with cut black effect. Operation is as below: Touch the [BLACK] button or key, then the program output is cut to black.
Lock Front Panel 1. Push the [MENU] button, and enter to the menu items, turn the rotary knob and select , enter to the Lock Front Panel, if select “on”, then LCD screen shown follows: Locked Panel! Press Menu key For 3 seconds to Unlock! 2. Push
Fader Correction: Shown Fader Correction steps. Key Board Test: LED Light Test select “On”, LED light for each key on front panel will be lit one by one, and KEY Value shown “MENU”. LED Light Test select “Off”, LED light for all keys will be off, and KEY Value shown “MENU”. PTZ Control M1 V1.56 and later version began supporting PTZ camera control. Specific operations are as follows: 1.
3. Set camera parameters such as zoom, focus, position adjustment, preset save, screen brightness adjustment and speed adjustment Zoom: Click [+] on the touch panel to zoom in the partial picture of the camera, and click [-] to zoom out Focus: The system defaults to auto focus. If manual focus is needed, the auto focus function can be turned off Brightness: Adjust the brightness of the camera PTZ Speed: Controls the direction key induction speed of the position controller.
USB3.0 Streaming Module A single USB3.0 module is suitable for modules with built-in bus sockets. USB3.0 with built-in bus sockets USB3.0 Operation (1) Remove the 4 cross screws with a cross screwdriver, as shown in the figure (2) Remove the old baffle and break off the old baffle in the lower right corner, as shown in the picture (3) Insert the USB 3.
(4) Replace the new baffle, as shown in the figure (5) Then fix the module on the baffle with the screw removed in step 1, as shown in the figure USB3.0 Streaming OBS Setting M1 is compatible with many third party steaming software, we recommend OBS, which is available to download on https://obsproject.com/download. Download the software and update to the latest version.
(3)Click video capture device to open up setting page (4) Choose :RGBlink USB 3.0 Capture (5) Choose Video Format YUY2 If there is no video format YUY 2 after setting above, check the USB 3.0 port connection. Make sure it is linked to USB 3.0port on PC by USB 3.0 cable. (USB 3.0 cable or port is standard in blue while USB 2.0 is in black If the captured video is showing mosaic, change the video format to YUY2.
(2) Audio setting on OBS. Choose Audio, click Setting and choose audio device (Mic/Auxiliary Audio Device) Streaming Setting (1) Find the RTMP URL and Stream Key provided by streaming broadcast website. (2) Copy URL and Stream Key (3) Back to OBS, click Setting in the lower right corner and click “Stream”. Choose Stream Type as “Streaming Service” or “Custom Streaming Server” . If choose “Streaming Service”, there is a list of streaming service name available in the drop down list of Service.
If choose Custom Service, just fill in URL and Stream Key. (4) Paste the RMTP URL to Server or URL and Stream Key to Stream Key. (5) Click “Start Streaming”. (6) Go back to live broadcast website and check the broadcasting.
Contact Information Warranty: All video products are designed and tested to the highest quality standard and backed by full 3 years parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages.
