Quick Start Guide

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: [phone] | [e-mail] | www.rgblink.com
28 / 35
Upgrade
1.Tools：
 Firmware ZIP upgrade package
 XTOOL (V1.0.1.10 or higher) -packaged in the ZIP
 Computer with network connection
o Windows (minimum Win 7, Win 10 recommended)
o macOS (minimum 10.13 High Sierra)
2.Upgrade
2.1 Power on the device connect LAN ports between PC and device by Cat6 cable;
2.2xE
nsure that your computer is on the same network as the mini. The default IP address of mini is 192.168.0.99,
in which case your computers IP address should be in the range 192.168.0.xxx (xxx cannot be the same as
mini or other device on the network) to enable connection between the mini and your computer.
Check IP of PC：
Step 1. Press keys together to open the Command Prompt
Step 2.
In the dialog type:
ms-settings:network-status
Step 3. Click on the Properties button