Quick Start ● USB3.
CONTENTS Product Introduction................................................................................................................................................... 2 Packing Configuration................................................................................................................................................. 3 Hardware Orientation................................................................................................................................................
Product Introduction mini/mini+ is a “mini” signal switcher and mixer which is able to stream 6-picture PVW or PGM from any one out of the 4 HDMI inputs to any live broadcasting platform via third party live streaming software such as OBS. It adopts compact design, equipped with a 2 inch TFT screen to preview the 4 inputs in real time. 14 transition effects on board work with T-Bar to do transition switching.
Packing Configuration Power Adapter USB3.0 Cable Note: Power adapter of US/EU standard supplied as standard accessory. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
Hardware Orientation Front Panel TFT display To display 4 inputs and menu PUSH/Y 1. Knob, turn to select menu item, push to confirm 2. Work as a quick button to switch HDMI Out between 6-Picture PVW and PGM when TFT is under the state of previewing 4 inputs. 3. On mini+, control camera lens position, moving up and down under PTZ control menu-Pos. 4. On mini+, control camera lens zoom in and out under PTZ control menu-Zoom.
Interface Panel HDMI OUT 1 HDMI Output port, connect to display to show Preview (6 pictures) or PGM. HDMI IN 4 HDMI Inputs, connect to input source from HD camera or PC DC 12V 1 DC Jack for power input, connect to 12V/4A power adapter. LAN Communication port to link dedicated software for control USB USB3.
Use Your Product MENU When mini is power on, the native TFT display show starting up page. Main Menu Input Push MENU and select the first menu item Push knob to enter menu © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
HDMI Push MENU and select the second menu item Push knob to enter menu HDMI means HDMI output, select Preview output and PGM output for HDMI. Output：Preview or PGM Format：1920×1080@60 USB3.0 Push MENU and select the third menu item USB3.0 means USB3.0 output ， push knob to enter menu，select Preview output and PGM output for HDMI.
IP Setting SET IP Address Manually Select each segment with the adjustment knob, then press to enter then set the value of each segment by pressing the knob again. Set IP Address Automatically Use this setting if you network/router has a DHCP server Select DHCP and set to ON Manual setting is disabled, and the IP Address for mini is set from the network. LANGUAGE LANGUAGE, select Chinese or English Factory Reset Factory Reset: Yes or No © Xiamen RGBlink Science & Technology Co., Ltd.
INFO Displays the serial number, network and firmware version information S Button Press the "S" button to display and SET features for MIX, MODE, PIP and FX (FX available only on mini+) Use the adjustment knob to the left of the S button to move through the settings of each feature, pressing the knob down to adjust and then confirm individual settings. MIX Select the desired transition effect for mixing by using the adjustment knob, and press to confirm the selection.
MODE Select from FAST or TBAR switching modes. In FAST mode switching between sources is done immediately a source (1,2,3,4) key is pressed. TBAR mode allows a source to be selected for PVW (Preview) with its button, then switched via the TBAR Set a TIME up to 5sec for transitions, fades or cuts to be used in FAST mode. PIP Display a source as an overlay window. There are both Picture-inPicture (PIP) and Picture-by-Picture (PBP) presets.
How to Switch Between Input Sources Green source buttons are available for switching to output. A blinking Green source button is the current PVW (preview) source [TBAR mode only] The source button that is Red is the video source that is the current PGM (program) output In FAST Mode: Press a source button (1, 2, 3, or 4) that is green. Selected source will be switched to the output with the set fade TIME and using the MIX transition selected, wit h the pressed source button becoming red.
Software Operation Install dedicated software named XPOSE to control mini or mini+. Right click the setup exe file . Choose Run as administrator to open the exe and install the software. After software is installed, click the icon XPOSE and login the software. Click Search to search mini device. After searching, all available mini devices in the sub-net can be found, up to 128 devices can found if there are. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.
Select the desired device by SN and IP and enter the management interface. The software interface is a simulation of operation panel on real mini device. For example, clicking Button M can open up menu as on the device. If it is the first time for you to use mini/mini+ we suggest you watch our User Guide video. Click the drop down arrow and click to play the user guide video. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
INPUT INFO HDMI Output USB3.0 Output © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
MIX Choose switch time and transition effect. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
PIP Choose layout mode for PIP Live Streaming Capture Device:choose RGBlink USB3.0 Capture H.265: When it is ON, users can watch 4 inputs streaming back on XPOSE software. Import the related OBS application if users need to do live streaming, click Relate to confirm. OBS: slide on to start streaming. Note: H.265 and OBS cannot work at the same time. User choose either H.265 or OBS, not both. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
AUDIO TEST PATTERN © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
HDMI Output Setting Password Protection Set password for the device. After password is set, password will be required when enter the software operation interface. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
IP Setting Manually set Gateway, MASK and IP for the device. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
FX On mini+, FX contains 3 features: DSK Setting, PTZ Camera Control and Logo Chroma Key Preset: Customize, black background, red background, blue background, green background , and white background . Switch: On/Off Mode: Select Key In or Key Out. Alpha: The adjustment range is between 0~255. The color space is R,G,B by default. The value range of R,G,B is from 0~255 0 means pure white, 255 means pure black.
PTZ Camera Setting Camera：choose camera 1~8 Enable：choose On to enable the LAN communication of the chosen camera. Zoom：Click + - to Zoom in and out Focus：Slide Auto to On usually Brightness：Click + - to adjust Preset：Load position and zoom setting of camera lens from View 1~20 Save: Save position and zoom setting of camera lens to View 1~20 Pan/Tilt Speed：Adjust the lens moving speed.
Logo Path：choose logo bin from local computer or U disk. Color：Adjust Red Green Blue value Transparent Switch：On/Off X，Y：adjust logo position © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
Version Info T-Bar Calibration Factory Reset © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
OBS Streaming OBS Setting mini is compatible with many third party steaming software, we recommend OBS, which is available to download on https://obsproject.com/download. Download the software and update to the latest version. 1.Click”+”icon 2.choose video capture device 3.Click video capture device to open up setting page 4.Choose :RGBlink USB 3.0 Capture 5.Choose Video Format YUY2 © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
If there is no video format YUY 2 after setting above, check the USB 3.0 port connection. Make sure it is linked to USB 3.0port on PC by USB 3.0 cable. (USB 3.0 cable or port is standard in blue while USB 2.0 is in black) If the captured video is showing mosaic, change the video format to YUY2. Audio Setting When there is no audio playing first check the video source see if the it is set in default value and then check the audio setting on OBS. 1.Set Default for the audio source. 2. Audio setting on OBS.
Streaming Setting 1. Find the RTMP URL and Stream Key provided by streaming broadcast website. 2. Copy URL and Stream Key 3. Back to OBS, click Setting in the lower right corner and click “Stream”. Choose Stream Type as “Streaming Service” or “Custom Streaming Server” . If choose “Streaming Service”, there is a list of streaming service name available in the drop down list of Service. If the streaming service is in the list, choose it from the list. © Xiamen RGBlink Science & Technology Co., Ltd.
If choose Custom Service, just fill in URL and Stream Key. 4. Paste the RMTP URL to Server or URL and Stream Key to Stream Key. 5. Click “Start Streaming”. 6. Go back to live broadcast website and check the broadcasting. © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
Upgrade 1.Tools： Firmware ZIP upgrade package XTOOL (V1.0.1.10 or higher) -packaged in the ZIP Computer with network connection o Windows (minimum Win 7, Win 10 recommended) o macOS (minimum 10.13 High Sierra) 2.Upgrade 2.1 Power on the device connect LAN ports between PC and device by Cat6 cable; 2.2xEnsure that your computer is on the same network as the mini. The default IP address of mini is 192.168.0.99, in which case your computers IP address should be in the range 192.168.0.
Step 4. Scroll down to find your IP address If the IP address is not in the same section, manual change of IP address is required. Here are the steps: Step 1. Click Start menu, click “Setting” Step 2. Open Network and Internet > Network and Sharing Center. Step 3. On the left pane of the new window, click Change adapter settings. Step 4. You will be displayed with Network Connections of the PC.
Connect to mini Step 1. Click on Connection Step 2. check the Net Comm option box Step 3. enter the IP Address of the mini (as example above, default mini IP is 192.168.0.99) remember computer and mini MUST be on the same subnet Step 4. click Confirm Step 5.Review Connection Status at bottom left, to confirm indicator light is green and there is device information showing at bottom right Load the Firmware Update File Step 1. Click Choose File © Xiamen RGBlink Science & Technology Co., Ltd.
Step 2. Navigate to the package folder and select the MiniPackage .bin file Set Components to Update Click the Select All check box which will enable all components to be updated to the latest versions Advanced updating allows single component upgrading © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
Upgrade Step 1. Click Upgrade Step 2. Monitor the progress DO NOT DISCONNECT OR POWER DOWN while updating Step 2. Following update click Confirm in the pop-up window © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
Step 3. Click Version to refresh, then review the main window to confirm upgrade versions now match Finish Step 1. Close XTOOL Step 2. Disconnect mini Step 3. mini is now upgraded and ready to use © Xiamen RGBlink Science & Technology Co., Ltd. Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.
Contact Information Warranty: All video products are designed and tested to the highest quality standard and backed by full 1 years parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages.
