Quadra User's Guide
Table Of Contents
- Table of Contents
- Introduction
- Installation and Setup
- Operations
- In This Chapter
- Introduction to Operations
- Setting Output Format
- Testing Outputs
- Selecting an Input Source
- Enabling and Disabling Outputs
- Understanding Auto Sync
- Cropping an Image
- Zooming an Image
- Panning an Image
- Sizing the Output Image
- Using Position
- Adjusting Brightness and Contrast
- Adjusting Hue and Saturation
- Adjusting Sharpness
- Creating a Background
- Creating a 2x2 Monitor Wall
- Command Line Interface
- Image Concepts
- Communications Setup
- Connector Types
- Firmware Upgrades and Troubleshooting
- Technical Specifications
350-7951 Quadra User’s Guide 115
E
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TECHNICAL SPECIFICATIONS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IN THIS APPENDIX
This appendix is divided into two sections:
• The “General Specifications” section provides Quadra’s technical,
functional and performance specifications.
• The “Parameter Storage” section provides details of the types of data
that are used in Quadra, and how they may be stored and retrieved.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL SPECIFICATIONS
The following section provides detailed tables of functional and performance
specifications:
• System Characteristics
• Digital Input Specifications
• Analog Input specifications
• Composite Video Input Specifications
• S-Video Input Specifications
• Graphic Output Specifications
• Image Control Specifications
• Control Specifications
• Power and Physical Specifications
Note The specifications listed in this appendix apply to a fully
configured Quadra system.