Quadra User's Guide
Table Of Contents
- Table of Contents
- Introduction
- Installation and Setup
- Operations
- In This Chapter
- Introduction to Operations
- Setting Output Format
- Testing Outputs
- Selecting an Input Source
- Enabling and Disabling Outputs
- Understanding Auto Sync
- Cropping an Image
- Zooming an Image
- Panning an Image
- Sizing the Output Image
- Using Position
- Adjusting Brightness and Contrast
- Adjusting Hue and Saturation
- Adjusting Sharpness
- Creating a Background
- Creating a 2x2 Monitor Wall
- Command Line Interface
- Image Concepts
- Communications Setup
- Connector Types
- Firmware Upgrades and Troubleshooting
- Technical Specifications
CONNECTOR TYPES
High Resolution Analog Connector
350-7951 Quadra User’s Guide 101
. . . . .
HIGH RESOLUTION
ANALOG CABLE
. . . . . . . . .
LENGTH
High quality RGB or YUV signals have very high signal bandwidths. Cable
lengths should be kept as short as possible, as longer cable lengths attenuate the
signal more severely at higher bandwidths.
13 CS/HS Composite Sync or Horizontal Sync
14 VS Vertical Sync
15 NC ID3 (not used)
Table C-3. RGB Analog Video Connector Pinouts(Continued)
Pin Signal Description