User's Manual

Note: In use, once the terminal block is connected to the external Rocker Switch, the
correspondent DIP Switch must be floating to avoid circuit shorted.
6. LED Indicator.
1) Charging LED lights in Green under charging.
2) Power/low-power LED (Power on in green, Low-power in Red)
3) Button pushed LED lights in Red under button pressed.
7. Buttons
12 buttons in 3 lines marked as letter A, B, C & D, then numeral 1-8.
Button A, B, C & D is for bank selection and button1-8 is for the cue output selection.