User Manual

A7.Test
Whenthefiringmoduleispoweredandanigniteris
connectedtoWiringTerminals#1,shift3-Position
Switch#2toSYNC-TEST,LEDIndicator#4willbelit
green,otherwisetheigniterisbrokenorthewires
arenotconnectedwell.
OnlywhentheconnectionistestedOK,theigniter
canfiresuccessfully.
-RedandGreen.TwoColorLED
-Aheavycurrentisflowingout.Itappearswhen3-PositionSwitch#2isRed
atARMandthemoduleisfiringorthemoduleʼscircuitisshort.
-Itappearswhen3-PositionSwitch#2isatSYNC-TESTpositionDimRed
andnoigniterisconnectedortheigniterisbroken.
-ItappearswhenthepowerischeckedlowtofireanBlinkingDimRed
igniter.
-When3-PositionSwitch#2isatSYNC-TESTandtheigniteristestedGreen
OK.
-Themoduleiscountingthefiringsequence.BlinkingGreen
-RedandGreenareoninthesametime,armedandreadytofire.Orange
Itappearswhen3-PositionSwitch#2isatARM.

A6.LEDIndicator#4:
3