User's Manual

Warning!!!
Power:
Firing Current:
Test Current:
Sizes:
1x 6LR61 9V battery
>750mA, Max.6A
<1mA
L62xH46xW38mm, antenna is retractile and can be folded.
With Power/Low Power Indication, Firing Indication, RF Signal
Indication, Overload Protection and Short Warning Indication etc..
Power:
Firing Current:
Test
Current:
Sizes:
Bright Red
Dim Red
1- , retractile and can be folded.
2- , states:
.
Firing. If the red LED keeps on all the
way, it indicates the module shorts out.
.
Sleeping. Once the module fires, 5
minutes later, the module will go to
sleeping mode to save power. Press
SYNC button or shift the switch to
wake it up.
3- . Used to synchronize transmitters or delete synchronizaton.
4- , ON / OFF.
5- for igniter connection. Red for anode, black for cathode.
6- . The battery compartment contains 1x 6LR61 9V battery.
Antenna
LED
SYNC Button
Switch
Wiring Terminals
Battery Cover
3-color
. Igniter is connected and tested well.
.
An matching RF signal is received, or the module is counting the firing
sequence number. If the wiring terminals are connected igniter and
the battery is low, the LED will be Green Blinking.
.
No igniter is connected.
.
If the Wiring Terminals are not connected igniter and the battery is
low, the LED will be Orange Blinking.
Green
Green Blinking
Orange (Red and Green LEDs are on in the same time)
Orange Blinking
Antenna
LED
SYNC
Button
Switch
Wiring
Terminals
Battery Cover
3-color
Parts:
12
3
4
5
6