User’s Instruction FCC ID:YMURF1M Cues can be activated one by one through pressing buttons RFRemotech Radio Frequency Remote Technology Remote Control Products, Remote Controllable Service
Warning!!! A. Only the person who has Fireworks licence is allowed to purchase the product, or the person of whom there isn’t fireworks purchase limitation in his/her country or district is allowed to purchase the product. RFRemotech/E-MadeinCHN is not with responsibility for any illegal usage. Descriptions Mode: OOK Wireless Radio Type: Learning Code Frequency: 433MHz Every receiver can learn one button of transmitters, Each button can activate its corresponding receiver(s) instantly. A.
5-Label. 6-Label Location, mark receiver. 7-Learning Button. Only when 3-position switch is FIRE, LEARN button can work. 8-Learning/Firing LED. See the following description Learn Code. 9-Fast Fastening Terminals. 10-Firing LED (see the above picture in Page 2) Before Use Put 4x AAA battery into battery enclosure.
work with receiver together. How to Learn Code: Shift 3-position switch to FIRE, keep depressing LEARN button more than 3 seconds to have Learning/Firing LED on, and then release LEARN button, press one of transmitter buttons within 3 seconds, LED will blink once and then be off, learning code succeeds. How to Clear Code: Shift 3-position switch to FIRE, press LEARN button and don’t release the button for more than 6 seconds until Learning/Firing LED blinks three times and then goes off, code is cleared.
Some Recommendations AlphaFire M12Q 1x TCF100-12LN/TCF100-12LNX 12x RF1M Range 100m. FCC, CE certified. Manufacturer: RFRemotech E-mail: service@RFRemotech.com Http://www.RFRemotech.com March, 2012 WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
