User Manual

2.Receiver
Model No.:
Firing Module RF1A2,
Cue: 1 Cue
Power: 6LR61 9V battery
Firing current: >750mA, Max. 6000mA
Test current: <10mA
Sizes: 61x38x46mm, antenna is retractile and can be folded.
1-Antenna, retractile and can be folded.
2-Power/Low Power LED, red. Normally the LED is always on when 3-position
switch is at ARM or TEST. When batteries are low, the LED blinks.
3-TEST LED/ LEARN/FIRE LED,dual colours yellow&red.
TEST LED:When exterior circuit is coherent, the LED is yellow; When exterior
circuit is interrupted, the LED is off.
LEARN LED: When Yellow is on, ready is to learn code of transmitter, or is clearing
code. When Red is on, terminals of receiver aresending or are to send heavy current,
can fire igniter or e-match. See the following descriptions Learn Code.
4- LEARN Button. Only when
3-position switch is at ARM or TEST,
LEARN button can work.
5-3-Position Switch, TEST-Test exterior
circuit or learn code, OFF-Power is off,
ARM-Receiver is armed to fire fireworks
or learn code.
6-Fast Fastening Terminals.