User's Manual

Pg 31 of 26
10 VIPER QUICKSTART USER GUIDE
Viper QuickStart Icon
Click on the icon to start the application.
Parameters Display in Utility
The Utility displays the following basic parameters that can be changed.
1. MAC ID
2. IP Address
3. Subnet Mask
4. Gateway
5. Device Name
6. Channel
7. DHCP/Static IP
Username and Password of Utility
If the username/password of the Devices have been changed, the QS Utility has to be updated
with the correct username and password. If the username/password of the QS Utility and the
Device is different, QS Utility will not operate as desire.