User's Manual

Pg 24 of 26
Making Changes
The changes are directly applied in the Utility.
It does not matter if all the devices have the same IP Address. The QS Utility identifies them
uniquely by their MAC Addresses.
Updating Changes
After the necessary changes have been made, the Administrator can apply the changes to the
AP. Check on the Reboot Checkbox and click on the Update button to reboot the device.
Multiple devices can be updated all at once. Use ctrl-left click to select multiple entries or type
ctrl-A to select all entries. Click on Update button to begin the update process.
To refresh the view, use the Find button.