User's Manual

10
Protection Type: Select either CTS only or RTS-CTS
Short Slot Time: Enable or disable short time slot usage
WPA Security
This section allows you to configure wireless encryption to prevent unwelcome parties from
reading your traffic. Authentication can also be configured to block outsiders from accessing your
network.
Enable WPA Security:
Note: Enable WPA security will Disable the non-WPA security settings
Disable WPA security will Enable the non-WPA security settings
Mode:
PSK EAP
Security Server:
PassPhrase:
Cipher Type:
Auto
Group Key Update Interval:
300
Enable WPA Security: Tick the box to enable the following suite of Encryption and
Authentication features. Enabling WPA Security will disable the non-WPA security.
PSK: Pre-shared Key. PSK mode is less secure than EAP as it does not use a RADIUS Server.
To configure, key in an 8-64 character PassPhrase onto both AP1001g and the Client.
EAP: Extensible Authentication Protocol. When chosen, the RADIUS server is used for
authentication between AP1001g and Client. To configure, use the “Edit Security Server Settings”
feature.
Security Server: This is to edit the RADIUS Server.
PassPhrase: Key in the 8-64 character for PSK.
Cipher Type: Choose Auto, TKIP or AES
Group Key Update Interval: Specifies the interval in milliseconds