User Manual
Table Of Contents
- INTRODUCTION
- PACKAGE CONTENTS
- CONNECTIONS
- LED
- BASIC IP NETWORKING
- GETTING STARTED
- CONFIGURATION WIZARD
- CONFIGURATION MENU
- System Summary > Configuration
- System Summary > Associations
- System Summary > Statistics
- System Summary > Site Scan
- Basic > SNTP Setting
- Basic > LAN Setting
- Basic > WAN Setting
- Basic > MAC CLONE
- Wireless > Basic Setting
- Wireless > Advance Setting
- Wireless > MAC Address Control
- DHCP > DHCP Server
- DHCP > DHCP List
- Port Forward > Virtual Server
- Port Forward > ICMP Forward
- Port Forward > DMZ Setting
- Port Forward > UPnP Setting
- Firewall > MAC Filter
- Firewall > IP Filter
- Miscellaneous > Dynamic DNS
- System Tools > System Log
- System Tools > System Admin
- System Tools > Backup/Restore Settings
- System Tools > Firmware Update
- System Tools > Reboot
- FACTORY RESET
- PC CONFIGURATION
- TECHNICAL SUPPORT
Wireless Setup
Enter the SSID you
preferred for your
network.
You can manually
select the channel
you wish to use or
allow the Router to
select a clean
channel to use by
selecting
SmartSelect.
Click Next
Click Next
Wireless Security
Enter the type of
security mode you
wish to use. Take
note that if you are
using a 802.11b
card, it does not
support WPA-PSK
or WPA.
Page 17 of 45