User Manual

To access the Configuration menu of the Router,
connect the router as shown in the previous section.
Open the web browser.
Type the Router’s default IP address (192.168.1.20)
into the browser’s Address field.
Note: If you have changed the default IP of the Router, make sure you enter the correct IP
address.
Type in admin for user name.
Type in admin for the password.
Click on Log In.
Note: If you have changed the default user name and password of the Router, make sure you
enter the correct user name and password.
Once the login is successful, you’ll see a configuration menu and a pop up window for wizard
setup. The wizard is a quick guide to run you through the configuration process so as to setup
your system in the shortest time. After the initial setup, you may wish to turn off the setup wizard
by removing the tick on Run This Wizard At Start. Click on Next to proceed with the setup wizard.
Note: If you have pop-ups blocker installed on your computer, it may prevent the Wizard window
from functioning properly.
Page 12 of 45