User's Manual Part 20

Step 3. Update Firmware
1. Leave the original settings on the page intact. They have been pre-configured for
you.
2. If you have accidentally changed the settings, configure using the picture below. The
FTP Password is admin.
Current firmware
version.
4. Click.
3. Click.
1. Read here.
2. Enter here.
3. Enter your PC’s IP Address. To help you, the Router suggests it to you on the web
page.
4. Save the settings.
5. Click Update and wait at least 40 seconds rebooting the Router.
Your firmware has been updated. After reboot, check that the version number has indeed
changed.
Page 33