User's Manual

RFNet Wireless LAN Access Point AP-I002
Chapter 4 AP-I002 Specifications
4.1 Hardware
4.1.1 Environment & Electrical
Adapter Input Voltage
90 ∼ 264 VAC, 50/60 Hz
Input Voltage over UTP
5VDC ∼ 12VDC, 2A at RJ-45
Water Resistance Yes
Operating Temperature
0 ∼ 55°C
Humidity
10 ∼ 90%
LEDs Power (PWR), Ethernet LAN activity (LNK),
WLAN activity (LAN 1, LAN2)
4.1.2 Wireless
Data Rate 11, 5.5, 2 and 1 Mbit/s, IEEE 802.11b & 802.11
Frequency Band
2.4 ∼ 2.4835 GHz
Modulation Direct Sequence Spread Spectrum (DSSS)
Channels 11 (USA), 13 (Europe), 14 (Japan); 3 non-
overlapping channels
Antennae Diversity Two antennae are used per radio channel to
provide optimal reception
Media Access Protocol Carrier sense multiple access with collision
avoidance (CSMA/CA)
User Manual
27