User's Manual

RFNet Wireless LAN Access Point AP-I002

For this help page, please refer to our web site www.rfnetech.com that gives you the updated help

either in Technical Support or FAQ 24 hours a day, 7days a week.

NOTES: All the values and the information above are only examples. Your display and setting are

subject to your own environment.

3.4.2 Access Point Search

The objective of using AP Search is to identify the IP and MAC Address of each live Access Point,

and furthermore, to use those information for the AP setting and configuration purposes.

Using the AP Search is as easy as to double click on the APM.exe file. Simply click on the

“Search” tab, which located on the right hand side of the “RFNET Access Point Search” screen and

it will shows all the information (as shown below).

3.4.3 Telnet

1. Connect to the telnet

You must know the IP address of the AP prior to connecting to AP-I002 through Telnet. It’s the

same procedure as connecting through web. After you know the IP address, in your windows

desktop, click the “Start” icon. And then the “Run” item in the popup menu. Here you are supposed

to see a dialog box as the following picture.

User Manual