User guide

www.RFM.com Technical support +1.678.684.2000 Page 14 of 21
© 2011 by RF Monolithics, Inc. E-mail: [e-mail]
DN-2400E User Guide - 08/05/11
Figure 6.6.1
Note: An additional configuration module with CD, power supply and serial cable can be order from RFM if the configuration module
that comes with the Starter Kit is lost or damaged.
7.0 DN-2400E/EP Configuration Utility
Create a file folder on the PC and copy the DNWizard.exe utility from the CD supplied with the
DN-2400E/EP Starter Kit into the folder. DNWizard.exe requires no installation and can be simply run.
Before starting DNWizard, confirm the PC is connected to the DN-2400E/EP configuration module with a
DB9 serial modem (straight through) cable, and ensure that the configuration module is fully plugged into
the DN-2400E/EP terminal block and powered from the wall plug power supply (green LED on the front of
the DN-2400E illuminated). The DNWizard main window is shown in Figure 7.0.1.
Figure 7.0.1