Specifications

3. OPERATION
Page 15 ©2001~2007 DH Instruments, a Fluke Company
Table 2. Summary of MFC-CB Direct Function Key Operation
Direct Function Keys are active from the MAIN run screen
See corresponding manual sections for full detail
Menu of commonly used setup features including creating and editing MFC
profiles, adjusting set point jog value and display resolution.
Menu of less frequently used internal functions and settings including resets,
user preferences, internal calibration, remote interface setup and Switchbox
setup.
Toggle active device channel between DEV1 and DEV2.
Select MFC profile which sets V or mA operation and the electrical signal
to flow unit relationship.
Turn ON and OFF MFC-CB’s optional 12 V drivers.
Display the set point unaltered by K and/or adjustment values and the
valve test point.
Define the DISPLAY function for the second line of the MFC-CB display.
Choices include DEV1&2, sum, difference, ratio, 2
nd
unit, clean.
Set/change an MFC gas correction factor (K factor).
Set point and measure unit (electrical, %FS, flow).
View a summary of the active MFC profile for the active channel
(DEV1 or DEV2).
Enter a set point to output on the active device channel.
Jog the set point up or down.
.
SETUP
0
SPECIAL
1
DEV1/2
2
MFC
3
DRIVERS
5
POWER
6
DISPLAY
7
K
9
UNIT
+/-
ENTER
SET MFC
Í
Î