Specifications

molbox™ RFM™ OPERATION AND MAINTENANCE MANUAL

3.6.5.3 <3TIME>

 PURPOSE

To view and edit the molbox RFM internal time and date settings.

 OPERATION

To access the TIME function press

[SPECIAL] and select <5prefs>,

<3time>. The display is:

Edit: 1time 2 date

08:32:11 am 19980101

Select <1time> to edit the time. Edit hours, then minutes, then am/pm by

pressing [ENTER] at each entry. Seconds go to zero when minutes are entered.

Select <2date> to edit the date. The date must be specified in

YYYYMMDD format.

The molbox RFM date and time are set to United States Mountain Standard

Time in the final test and inspection process at the factory. If desired, use

the DATE function to set your local time and date.

3.6.5.4 <4ID>

 PURPOSE

To view or edit the molbox RFM user ID and to view the molbox RFM

serial number.

 PRINCIPLE

molbox RFM has a factory programmed serial number that is included on the

product label on the bottom of the case and can be viewed in the

introductory screen.

molbox RFM also allows the user to store a unique, twelve character,

alpha numeric ID number. This feature is frequently used to assign an

organizational control ID (e.g., an asset number, tool number, standard

number, etc.). The ID function allows the ID number to be viewed and edited.

It also displays the molbox RFM factory serial number.

 OPERATION

To access the ID function press [SPECIAL] and select <5prefs>, <4ID>.

Select <1view>, to view the current ID.

Select <2edit>, to edit the ID.

The ID has twelve characters. When the edit screen is opened, the cursor is on

the first character. Numerical values can be entered directly from the keypad.

In addition, the [←] and [→] keys can be used to toggle through a list of available

alpha numeric characters. Holding the key slews through the characters.

Character order going up ([→]) is: blank space, symbols, lower case letters,

upper case letters, numbers. Press [ENTER] to select a character and move to

the next character.

When a character is selected the cursor moves to the next character. To leave a

blank character, press [ENTER] with the field for that character blank. Use this

for the trailing characters if the ID being entered is less than twelve characters.