Specifications

molbox™ RFM™ OPERATION AND MAINTENANCE MANUAL
© 1998-2007 DH Instruments, a Fluke Company Page 112
ID(=)
Purpose Read or set the user defined identification label.
Syntax “ID=string”
“ID”
Default “ID=NONE” (no microrange option)
Arguments string: An alphanumeric string up to 12 characters wide.
Remarks The user defined ID label can be used to allow the user to “tag”
the molbox RFM with a unique identifier. This ID is stored in
non-volatile memory and cannot be erased by a power failure,
system fault or reset.
Example Command:
Reply:
“ID=RFM-001”
“RFM-001”
See Also 3.4.5.4
KFACT(=)
Purpose Read or set the molbox RFM K factor.
Syntax “KFACT=kfactor”
“KFACT”
Arguments kfactor: The new “K” factor.
Defaults “FACT=1.0” (Disabled)
Remarks The “K” factor is set to 1 for normal operation.
Example Command:
Reply:
“KFACT”
“1.000000”
See Also 3.2.1