Specifications

FOCUS System Manual
Page 6–2
6.1.2 4 RU Chassis
As shown in Figures 6-6 and 6-7, the 4 RU
FOCUS chassis was designed with a dead back. A
dead back is a specially designed rear panel made
to cover all high voltage points. All cabling passes
through special foam to contain RF and to shield
the wire insulation from the metal edges. The 4
RU FOCUS chassis has been tested to EMI and
RFI levels consistent with CE requirements.
6.2 Drawings
The chassis drawings are shown at the end of this
chapter.
Figure 6–2. Transceiver Interface Component Location (DB15 Type) (F020BKPA2).