Specifications

Page 4–2
FOCUS System Manual
FOCUS Component Recommended Test Equipment
Common Equipment General purpose Digital Volt Meter (TRMS)
IBM Compatible Portable PC, Pentium 166 or greater processor, one
serial and one mouse port or two serial ports, 16 Mbytes of memory
minimum, Microsoft Windows 95, 98, NT, 2000, XP
Focus Configuration Software (FCS)
Two-Wire Voice V2W – V2W
(V2W/V2T) Module Two (2) analog telephones
V2T – V2W
One (1) analog phone line
One (1) touch tone analog telephone
Four-Wire Voice (V4W) Voice Transmission Test set, HP 3551A (if available)
Module HP 4934A or Noyes Optical Power Meter Attenuator (optional)
Protective Relay Inter- No additional equipment required
face (PRI/PRS) Module
Contact Transfer No additional equipment required
(CTR) Module
Low Speed Data (232) Data error analyzer, HP Model 1645A or equivalent
Module
Pilot Wire Interface Oscillator
(HCB/SPD) Module Tektronix Oscilloscope Model 2213 or equivalent
High Speed Data (64K) 64R, 64V
Module Lynx Digital Data network analyzer or equivalent
Data error analyzer, Fireberd Model 6001 with RS 449 and V.35 inter-
faces, WRG PFA-35 or equivalent
64G
Lynx Digital Data network analyzer or equivalent
Data error analyzer, Fireberd Model 6001 with G.703 interface, WRG
PFA-35 or equivalent
Party Line Data (PLD) No additional equipment required
Module
Optional Test Equipment 3m Photodyne Fiber Optic Power Meter, model 2285XQ, or equivalent
3m Photodyne Fiber Optic Attenuator, model 1975XQ, or equivalent
Fiber Optic Patch Cable
Variable Power Supply (35 to 250Vdc)
Transmission Impairment Measuring Set (TIMS), HP model 4934A (with
option 001 installed), or equivalent
Table 4–1. Recommended Test Equipment.