Specifications

December 2008 Page B–3
Appendix B — Troubleshooting
No Address mismatch channel A CLEARED
Returned to normal
Information Address mismatch channel A; Received addr: %d
Redundant Path PRI receiving incorrect remote address on pri. channel A; %d = actual addr.
received
No Address mismatch channel B CLEARED
Returned to normal
Information Address mismatch channel B; Received addr: %d
Redundant Path PRI receiving incorrect remote addr. on redundant path channel B; %d = actual
addr. received
Yes APM Loop %d ARM Failed: Address: %04d
APM Loop %d = 1 or 2, failed to arm due to neighbor address %04ds = chassis id error
No APM Loop %d Channel NOT Flipped: Time Slot %02d
Alternate Path Mode Loop %d = 1 or 2, time slots %02d = 1 - 24 did not flip
Yes APM Loop %d Flipping: Initiated by: %04d
APM Loop %d = 1 or 2, and has flipped channels to alt. path was initiated by %4d = chassis id
YesAPM Loop %d Going Down: Direction: %s
APM Loop %d = 1 or 2, initiating APM event due to loss of signal in the %s = trans. (1-1, 2, 2-
1, 2) direction
Yes APM Loop %d Going Inactive
Alternate Path Mode Loop %d = 1 or 2, going disabled
Information APM Loop %d
ARMED
Alternate Path Mode Loop %d = 1 or 2, configured correctly and enabled
Information APM Loop %d Armed AUTOMATICALLY
APM Loop %d = 1 or 2, armed when a maintenance module is inserted in an armed loop
Information APM Loop %d Disarmed from %s
Alternate Path Mode Loop %d = 1 or 2, disabled by %s = chassis id
Information APM Loop %d Going
Armed
Alternate Path Mode Loop %d = 1 or 2, verifying addresses before enabling
Information APM Loop %d XCVR %s Address Change: Remote Command From Addr: %04d
APM Loop %d = 1 or 2, in trans. (1-1, 2, 2-1, 2) direction neighbor address changed by %04d
= chassis id
Yes Backup of settings to flash memory failed
Duplicate copy of setting was not successfully stored
Information Broadcasted Configuration Lock
User lockedFOCUS setting via broadcast command in FCS
Information Broadcasted Configuration Unlock
User unlocked FOCUS setting via broadcast command in FCS
Yes Channel
A Path Errors
Redundant Path PRI data errors on primary path, channel A
No Channel A Path Errors CLEARED
Returned to normal
YesChannel B Path Errors
Redundant Path PRI data errors on redundant path, channel B
No Channel B Path Errors CLEARED
Returned to normal
ALARM, EVENT TEXT, ALPHABETICAL BY EVENT
CONCERN? EXPLANATION OF EVENT