Specifications

December 2008 Page 24–5
Chapter 24. Ethernet Switch (6NE) Module
24
24.5.2 Ftp Test
File Transfer Protocol allows you to send a
complete file over a LAN/WAN. Windows
provides only the client end and depends on the
server being a UNIX machine.
The ftp command looks like this:
ftp 192.168.1.2
This application will then prompt for a username
and password to the ftp server. You can then
transfer a file in either direction. After a file
transfer, the time and bandwidth are reported.
24.5.3 Windows File Transfer
Drag and drop file transfers can also be performed
over any link or multiple links to test connectivity
as well. However, Windows does not provide
statistics like ftp does.
24.5.4 Web Surfing
Depending on the presence of an Internet gateway,
you can surf the web to test for connectivity also.
Web pages should appear quickly with a large
number of bonded DS0 channels and slower with
less bonded channels.
24.6 Drawings
The schematic for the 6NE module is available
upon request. The component location drawing
for the module and it’s interface are at the end of
this chapter.
Table 24–1. 6NE Module Specifications.
Catalog ID 6NE
Data Rate (Internal) 64K-1.536K
Data Rate (External) 10/100 mbps
Protocol (Internal) HDLC
Protocol (External) IEEE 802.3
Connector 2 x RJ-48
Indicators Data Errors-A Data Errors-B
CPU Ready-A CPU Ready-B
Link Integrity-A Link Integrity-B
Link Integrity Port 0
Link Integrity Port 1
Link Up - A Link Up - B
Alarm Output HDLC Error