Data Sheet
Table Of Contents
- Features
- Applications
- Description
- Blockdiagram
- Characteristics
- Application Notes
- Integrators Information
- This module is approved for installation into fixed and/or mobile host platforms and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC/ISED multi-transmitter guidelines. End users must be provided with transmitter operating conditions for satisfying RF Exposure compliance.
- Hereby, RFbeam Microwave GmbH declares that the radio equipment type K-MC4 is in compliance with Directive 2014/53/EU. The declaration of conformity may be consulted at www.rfbeam.ch.
- Outline Dimensions
- Ordering Information
- (includes Mounting Plate Type1)
- Datasheet Revision History
K-MC4 MONOPULSE RADAR TRANSCEIVER Datasheet
Parameter Conditions / Notes Symbol Min Typ Max Unit
Antenna
TX vertical -3dB beamwidth E-Plane W
φ
12 °
TX horizontal -3dB beamwidth H-Plane W
θ
30 °
RX vertical-3dB beamwidth E-Plane W
φ
12 °
RX horizontal -3dB beamwidth H-Plane W
θ
40 °
Horiz. sidelobe suppression D
φ
-20 dB
Vert. sidelobe suppression D
θ
-20 dB
Rx1, Rx2 mechanical distance d
Rx
13.7 mm
Body
Outline Dimensions Connector left unconnected 98*78*7 mm
3
Weight 90 g
Connector Module side: AMP X-338069-8 8 Pins
Antenna System Diagram
This diagram shows module sensitivity (output voltage) in both azimuth and elevation directions. It
incorporates the transmitter and one receiver antenna characteristic.
Azimuth 30° , Elevation 12°
At IF output voltage -6dB
(corresponds to -3dB Tx power)
Fig. 2: Antenna system diagram
© RFbeam Microwave GmbH, Schuppisstrasse 7, CH-9016 St. Gallen Page 3/14