Data Sheet

ManualsBrandsRFbeam Microwave ManualsElectronics24GHz digital radar transceiver

This module has been granted modular approval for

ﬁxed and/or mobile applications. The modular appro-

val allows the end user to integrate the module into

a ﬁnished product without obtaining subsequent and

separate FCC/ISED approvals for intentional radiation,

provided no changes or modiﬁcations are made to

the module circuitry. Changes or modiﬁcations could

void the user’s authority to operate the equipment.

The end user must comply with all of the instructions

provided by the Grantee, which indicate installation

and/or operating conditions necessary for complian-

ce. The ﬁnished product is required to comply with

all applicable FCC/ISED equipment authorizations

regulations, requirements and equipment functions

not associated with the transmitter module portion.

Modiﬁcation to this product will void the

users’ authority to operate this equipment.

The OEM integrator is responsible for the ﬁ-

nal compliance of the end product with this

integrated modular approved transmitter

module. This includes measurements with

the RF module integrated and activated as

deﬁned in KDB 996369 and if applicable

appropriate equipment authorizations as de-

ﬁned in §15.101.

United States (FCC) and Canada(ISED)

Labelling and user information

requirements

If the label of the module is not visible from the outs-

ide of the end product, it must include the following

texts on the label of the host product:

FCC Contains FCC ID: 2ASYV-K-LD2

ISED Contains IC: 24358-KLD2

In addition to marking the product with the appro-

priate ID’s, the end product shall bear the following

statement in a conspicuous location on the label or

alternatively in the user manual:

This device complies with Part 15 of the FCC Rules

and with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following

two conditions: (1) this device may not cause

harmful interference, and (2) this device must ac-

cept any interference received, including interferen-

ce that may cause undesired operation.

Le présent appareil est conforme aux CNR d'In-

dustrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée

aux deux conditions suivantes: (1) l'appareil ne

doit pas produire de brouillage, et (2) l'appareil doit

accepter tout brouillage radioélectrique subi, même

si le brouillage est susceptible d'en compromettre

le fonctionnement.

RF Exposure

This module is approved for installation into ﬁxed and/

or mobile host platforms and must not be co-located

or operating in conjunction with any other antenna or

transmitter except in accordance with FCC/ISED mul-

ti-transmitter guidelines. End users must be provided

with transmitter operating conditions for satisfying RF

Exposure compliance.