User's Manual

___________________________________________________________________________
RF Technology T800 Page 22
7.2 Physical Configuration 7 SPECIFICATIONS
7.2 Physical Configuration
The transmitter is designed to fit in a
19 inch rack mounted sub-frame. The installed height is
4 RU (178 mm) and the depth is 350 mm. The transmitter is 63.5 mm or two Eclipse modules
wide.
7.3 Front Panel Controls, Indicators, and Test Points
7.3.1 Controls
Transmitter Key - Momentary Contact Push Button
Line Input Level - screwdriver adjust multi-turn pot
7.3.2 Indicators
Power ON - Green LED
Tx Indicator - Yellow LED
Fault Indicator - Flashing Red LED
External ALC - Green LED
External Reference - Green LED
7.3.3 Test Points
Line Input – Pin 6 + Ground (pin 1)
Forward Power – Pin 8 + Ground (pin 1)
Reverse Power – Pin 4 + Ground (pin 1)
Tuning Voltage – Pin 9 + Ground (pin 1)
Serial Data (RS-232) – Pins 2 / 3 + Ground (pin 1)
7.4 Electrical Specifications
7.4.1 Power Requirements
Operating Voltage - 10.5 to 16 Vdc with output power reduced below 12 Vdc
Current Drain - 5A
Maximum, typically 0.25A Standby
Polarity - Negative Ground