User manual

RF Technology WinTekHelp User Manual Page 7
WinTekHelp User Manual 2. Setting Up
If you have a problem with the cable, fix the problem, and click on the RETRY button. If you are not able to use
the default COMM port (eg it is being used by a mouse or an internal modem), then you will need to Cancel (by
clicking on the little button marked “X” on the top right of the dialog box) and try running WinTekHelp again.
You may wish to prepare program files for an exciter or a receiver when no device is attached to your PC. The
buttons marked “Edit Channel Data Files” and “Edit Parameter Data Files” allow you to read, edit, and write
such program files, although no receiver or exciter is connected to your PC.
Fig 3
Fig 4